Skip to product information
1 of 9

AquaBlastFit

AquaBLAST COMBO - 25 Liter Bag PLUS the Suction Tether System

AquaBLAST COMBO - 25 Liter Bag PLUS the Suction Tether System

Regular price $214.99
Regular price $244.99 Sale price $214.99
Sale Sold out
Shipping calculated at checkout.

Powered by our partner, ClingTech Bionics of Germany, and their amazing ClingFish Effect suction cup.

Harness the power of nature with the first underwater suction cup capable of attaching and detaching to rough swimming pool surfaces underwater!

Get fit with the first portable low-impact boxing and fitness combination for swimming pools. Set up the AquaBLAST 25 Liter Fitness and Punching bag in about 30 seconds with 6 gallons (25 liters) of pool water. The bag floats on the surface and is fluid with the surrounding water, making it easy to handle.

Connect the AquaBLAST Suction Tether to the pool floor for tethered aqua combat. The innovative ClingFish Effect suction cup holds the AquaBLAST Punching bag in place and provides non-stop kickboxing and fitness action in 3-5 feet of water.

The AquaBLAST 25 Liter bags weigh 50+ pounds when filled with water, making it the perfect workout for strength training, low-impact rehab, fitness, or FUN!  

This combo package includes both the 25-Liter AquaBLAST Punching and Fitness Bag AND the AquaBLAST Suction Tether. Please check with the Suction Tether Product Page before ordering to determine if your pool will support the suction cup.

If you already have an AquaBLAST 20- or 25-Liter bag, you can select just the Suction Tether (unless you want an extra 25-liter bag).

Package Includes:

  • AquaBLAST 25 Liter Punching Bag with Harness
  • AquaBLAST Suction Tether system (Clingfish Suction Cup)

NOT ALL SWIMMING POOL TYPES ARE COMPATIBLE WITH THE SUCTION CUP. PLEASE REVIEW THE DOCUMENTATION AND CHECK WITH A POOL PROFESSIONAL BEFORE USE TO DETERMINE THE SUITABILITY OF THE PRODUCT WITH THE POOL YOU INTEND TO USE.

Pool Surfaces Supported

Most commercial swimming pools use a plaster finish. In general, vinyl, plaster, fiberglass, and concrete-based pools work well. The suction cup must create a complete seal around the area of attachment and the surface must be non-porous and non-permeable.

POOLS WITH SMALL TILE ARE NOT SUPPORTED - LARGER TILE (6x6 INCHES AND LARGER) MAY BE SUPPORTED. ROUGH AND UNEVEN FINISHES TYPICALLY PREVENT THE SUCTION CUP FROM SLIDING. 

UNSUPPORTED FINISHES:

  • Bumpy and pebble finishes
  • Porous aggregate finishes such as DiamondBrite have been tested as inconsistent, as there may be a porous layer that prevents the suction cup from adhering.


Please contact Aquablastfit prior to purchase if you have questions about your pool surface.

Setting up the AquaBLAST Suction Tether system

First, set up the AquaBLAST® punching and fitness bag in the swimming pool.

Connect one end of the adjustable bungee included to the AquaBLAST 20L bag and the other end to the Clingfish Effect™ suction cup. 



To attach the suction cup, stand in the swimming pool in 3 - 5 feet of water. Press the suction cup to the pool floor with your foot. Be sure to press the suction cup down evenly from the top and to press out the water trapped under the suction cup.




TIP: PRACTICE ATTACHING & DETACHING THE SUCTION CUP TO THE SIDE OF THE POOL A FEW TIMES.

Disconnecting the suction cup

To release the suction cup, pull up on the red bobber with your hand or use your toes or use the side of your foot to slide the red bead inward until it releases.

DO NOT ATTEMPT TO FORCE THE SUCTION CUP LOOSE BY PULLING THE BUNGEE CORD! DAMAGE MAY RESULT TO THE SUCTION CUP OR TO THE POOL FINISH.

Care 

Avoid touching the soft suction cup material as skin oils and debris may adhere to the surface and reduce the suction cup effectiveness. Rinse and periodically clean with a drop of dishwashing detergent and lukewarm water. Do not leave the suction cup submerged underwater for extended periods of time. Keep away from direct sunlight and store the suction cup unattached (not suctioned).

Swimming pool water should be maintained at generally accepted standards for public swimming pools. Unbalanced pool water may reduce the lifespan of the product. The suction cup is designed for the application described.

Warranty and Returns

The AquaBLAST® Suction Tether, powered by ClingTech Bionics, has a 30-day return policy and a 90-day warranty when used as directed by the manufacturer.

Notices

NO LIABILITY IS TAKEN FOR THE USE IN OTHER APPLICATIONS; WE ASSUME NO LIABILITY FOR DAMAGE CAUSED TO A POOL OR POOL LINER. CHECK WITH YOUR POOL MANUFACTURER PRIOR TO USE TO DETERMINE THE SUITABILITY OF THIS PRODUCT WITH THE POOL YOU INTEND TO USE.

AquaBLAST® is a registered trademark of RomaQuatics LLC.

Clingfish Effect™ suction cups are made in Germany by ClingTech Bionics. 
Patent. No. 11,286,974

“The included KnotBone™ Adjustable Bungee™ #5 is designed and engineered by Nite Ize, Inc. in Boulder, CO USA. MANUFACTURED IN CHINA. Patent and Trademark Information at Niteize.com/IP. The distinctive shapes, styles, configuration and overall appearance of all Nite Ize products are trademarks of Nite Ize, Inc.”+

View full details